Serms
> View Products
> More Information
SERMS srl was established in Terni in 2004 as a spin-off venture of the University of Perugia, with the aim of transferring the highly innovative skills developed by its associates in the academic field, to entrepreneurial opportunities. From the moment of its set up, SERMS srl has inspired and strengthened the cultural exchange between the academic and the the industrial worlds, which contributed to steadily broaden the selection and the quality of the services offered. Today, SERMS srl operates on a national and international scale and can offer to its customers a wide range of services, spanning from the Environmental Testing to Mechanical Design of aerospace, automotive, naval and industrial components. Its growing skills in these areas has gained SERMS srl increasing recognition, and now it can count on important collaborations with major national and international players.
Drello
> View Products
> More Information
DRELLO develops, manufactures and distributes high-quality electronic measuring and control instruments. Based on over 65 years of experience, we offer tools and custom-made solutions providing technical perfection and operating reliability for customers all over the world. Continuous development of our products guarantee a significant contribution to improving your production and product quality.
ACS
> View Products
> More Information
ACS is world-famous since 1952 for its design and manufacture of a comprehensive range of environmental test chambers, from the compact bench-top temperature and humidity test chambers to the most complex high tech systems such as Thermal Vacuum chambers for aerospace applications and Calorimeters.
Crystal Instruments
> View Products
> More Information
Crystal Instruments were established in 1996. They design, produce, sell, and service hardware and software for environmental testing, dynamic signal analysis, Dynamic measurement, and machine vibration monitoring. Crystal Instruments designs the products from the circuit boards, FPGA code, firmware, algorithm, DSP software, and user interface software to the calibration tools. From start to finish, they develop and own the technology, so that it is expandable and upgradeable. The CoCo and Spider instruments have been widely used in machine condition monitoring and diagnostics by taking and analyzing the vibration signals. In the testing lab, professionals use their products to conduct the measurement and control for vibration, shock, acoustic, pressure, temperature, humidity, and other physical quantities. In the past three years, they have gradually expanded the products from vibration testing to combined testing. Following the trends of the industry, they have progressed from single quantity measurement and control to an integrated environment. Crystal Instruments has a well-established worldwide distribution network with support and service centers located in the USA, Europe, India, and China.
Centrotecnica
> View Products
> More Information
Since 1979, Centrotecnica is focused on developing and manufacturing high quality products for use in environmental testing. Their range of head expander's and fixtures have been used for testing complex structures and they also provide a standard range of expander's that are supplied to customers with tests systems from all the main manufacturers. Centrotecnica also produce a series of high quality Horizontal Slip tables that have been designed for a variety of applications that include testing of products with large physical dimensions and mass to small components. There range of VST and RT Slip-tables can be retrofitted to any well known manufactures vertical Vibration Test Systems to enhance customers capabilities. Centrotecnica also have one of the largest commercially available Test houses in Europe and can offer a wide range of Vibration ,Thermal and shock testing services to industry. Explore Centrotenica's core capabilities
DTS
> View Products
> More Information
Diversified Technical Systems is based in Seal Beach, CA. Founded in 1990 by three crash test engineers, our mission is to support the data acquisition needs of the industry’s most demanding, high impact testing applications. Today, that mission is supported by a dedicated team around the globe.
DTS has a long history working with the military on projects ranging from vehicle black boxes to blast testing and helmet sensors, all with a focus on advancing solider survivability. Starting in 2008, over 7,000 helmets with “smart sensors” designed by DTS were fielded by the U.S. Army and U.S. Marine Corps. An additional 20,000 units have been completed in ongoing efforts to reduce head injuries and improve safety systems.
IMV Corporation
> View Products
> More Information
IMV Corporation with headquarters in Osaka is the world’s leading supplier of noise and vibration test equipment.
Established in 1957 and listed on the Japanese securities exchange , IMV design and develop a full range of Electro -Dynamic Vibration Test Systems.
IMV produce and extensive range of single axis vibration test systems along with there comprehensive series of six degrees of freedom and World leading Simultaneous multi-axis vibration test solutions
IMV opened there research and development centre in the United Kingdom in 2011 and are continuing to develop there "ECO" energy saving technology products for the Global Vibration Test market.
Ziegler Instruments
> View Products
> More Information
Ziegler Instruments GmbH manufacture systems designed to test automotive components for annoying noises.
With a focus of providing customers with solutions to test for Squeak and Rattle , Ziegler also provide products and services to enable materials used within vehicles to be tested at the vehicle design phase for their "stick slip" properties thus reducing the risk of annoying noises occurring.
Ziegler's team of experienced engineers are actively engaged by many of the leading high quality vehicle manufacturers to assist in the design of interior sub systems to ensure that there final product designs take into account squeak and rattle prevention.
Ziegler also produce bespoke test facility's for dynamic squeak and Rattle testing and have designed and developed there OCIAN software system to be used as part of many leading vehicle manufacturer's and OEMS quality procedures.
SM Instruments
> View Products
> More Information
SM Instruments is an expert in sound and vibration. Sound Camera, BSR Scanner, and Wind Turbine CMS are SM Instruments’ innovative main products. SM Instruments also provides a unique customizing service including test consulting, in order to provide perfect sound and vibration test solutions. Our service successfully provided many instruments which are operating in various world class production lines.
SM Instruments is a Gold Alliance Partner of National Instruments (NI), a US test instrument manufacturing company. NI mainly provides data acquisition boards and development platforms for SM Instruments. Since NI possesses a world widemarketing network, NI operates an alliance partner program to generate synergy in every area of expertise. SM Instruments represents NI’s sound and vibration testing power through its cooperation with NI since the beginning.
SM Instruments operate in a number of core markets including: Renewable Energy, Multimedia, Appliances, Automotive & Electronics.
PCB Piezotronics
> View Products
> More Information
PCB® manufactures the largest selection of sensors and sensor accessory products worldwide. Their product lines include sensors for the measurement of acceleration, acoustics, force, load, pressure, shock, strain, torque, and vibration. Our Products are the first choice of engineers and scientists at leading businesses, research institutions, and independent laboratories around the world.
L.A.B Equipment
> View Products
> More Information
L.A.B. Equipment, Inc. was established in 1933 and has been recognised for decades as the global leader in the design, manufacturing, and service of product reliability and package testing equipment. This includes drop testers, shock testers, hydraulic vibration, mechanical vibration, incline impact testers; and through our sister company, Techlab Systems, compression testers.
All equipment meets a large variety of testing standards including ISTA, ASTM, ISO, TAPPI, and MIL-STD, to name a few. L.A.B is a team-based organisation committed to manufacturing quality products on a consistent basis while maintaining a work ethic and attitude directed towards continuous improvement.
All Standards and Accreditations for L.A.B Equipment can be found here: L.A.B Equipment Resources.
